Shaper Machine W635A
Product main features:
1. Shaper workbench can about rotational angle worktable moving structure with lateral and lifting; to planing inclined plane, thereby expanding the scope of use.
2 feed system of shaper with a cam mechanism, adjust the feed quantity. Change the amount of knife, very convenient.
3. Shaper in knife system overload safety device is installed, when due to careless handling or by external influence and cutting overload when, take the knife itself slipping, nondestructive parts which guarantees the machine to normal operation.
4. The sliding pillow and bed rails and with speed gear pair and the main rail sliding surface, lubrication oil pump has played for circulating lubrication.
5 Shaper with parking brake mechanism, so the speed of transformation. When starting machine tools and parking, the power supply can not be cut off.
| Model | W635A | |||
| Maximum cutting length(mm) | 350 | |||
| Maximum distance from ram bottom to table surface(mm) | 330 | |||
| Maximum table horizontal travel(mm) | 400 | |||
| Maximum table vertical travel(mm) | 270 | |||
| Leading surface of the planner to bed out of the maximum distance | 550 | |||
| The maximum displacement of the ram | 170 | |||
| Maximum turning angle of the worktable( no vice) | ±90° | |||
| Maximum turning angle of the worktable( vice) | ±55° | |||
| The turret maximum vertical travel (mm) | 110 | |||
| Ram reciprocating frequency per minute | 32,50, 80,125, times min | |||
| The ram back and forth a table feed amount | Wheeled round a tooth(vertical) | 0.18mm | ||
| Wheel rotation a tooth (horizontal) | 0.21mm | |||
| Wheel rotation 4 tooth(vertical) | 0.73mm | |||
| Wheel rotation 4 tooth( horizontal) | 0.84mm | |||
| Power of motor(kw) | 1.5kw 1400r/min | |||
| Overall dimensions(L×W×H)(mm) | 1530x930x1370mm | |||
| N.W/G.W(kg) | 1000kg/1200kg | |||
评价
目前还没有评价